Company News

Colombian Buyers Visit Our Xuzhou Crane Factory After the Canton Fair

Three buyers from Colombia who met us at the 140th Canton Fair toured our Xuzhou truck-mounted crane factory on 2 November 2026 and checked the cranes and parts behind their interest in a 16-ton telescopic boom crane.

Achord Chan 5 min read

In this article
  1. From the Canton Fair to Xuzhou
  2. What the buyers checked in our assembly hall
  3. The 8-ton telescopic crane by the hall door
  4. What other buyers can take from this visit
  5. Frequently asked questions
  6. Plan your own visit

On 2 November 2026, three buyers from Colombia visited our truck-mounted crane factory in Xuzhou, China. They first met MIAOXUE at the 140th Canton Fair and are interested in a 16-ton telescopic boom truck-mounted crane. During the morning they walked through our crane assembly hall, checked a hook block and a slewing unit up close, and finished in front of an 8-ton telescopic crane already mounted on a truck chassis.

Visit at a glanceDetails
Visitors3 buyers from Colombia, with 2 MIAOXUE sales representatives
First contact140th Canton Fair, Guangzhou, October 2026
Crane of interest16-ton telescopic boom truck-mounted crane
Visit date and placeMorning of 2 November 2026, MIAOXUE factory, Xuzhou, Jiangsu
What they checkedAssembly line, a hook block, a slewing unit, an 8-ton telescopic crane on a truck chassis
The Colombian buyers’ factory visit in brief
Three buyers from Colombia and a MIAOXUE sales representative in front of a red 8-ton telescopic boom crane mounted on a truck chassis at the Xuzhou factory
The Colombian buyers with one of our sales representatives in front of an 8-ton telescopic boom crane already mounted on a truck chassis, Xuzhou, 2 November 2026.

From the Canton Fair to Xuzhou

The buyers first met MIAOXUE at the 140th Canton Fair in Guangzhou in October 2026. Our Canton Fair recap shows the cranes we displayed there. A trade fair booth is a good place to compare suppliers, but it only holds a few machines, while a factory shows how those machines are built and how the parts are finished. That is why, after the fair, the buyers travelled to Xuzhou to inspect the cranes where they are manufactured.

Their interest is a 16-ton telescopic boom truck-mounted crane, the class of our SQ16SA5. A telescopic boom crane is a crane with a straight boom that extends in sections from inside each other. It suits jobs such as lifting heavy loads close to the truck or reaching straight out over a flat bed. Our guide What is a telescopic boom crane? explains how the boom and cylinders work.

What the buyers checked in our assembly hall

Two MIAOXUE sales representatives took the group through the assembly hall. The buyers stopped often and recorded what they saw on their phones to share at home. The photos from the morning show three parts of the tour.

  • Cranes on the assembly line. The group walked past rows of red and yellow MIAOXUE knuckle boom cranes at different stages of assembly, some still wrapped in protective film before shipping.
  • A hook block up close. One of the buyers held and turned a large hook block to look at the sheaves, the hook and the finish.
  • The slewing unit and base. The group looked up at the slewing mechanism and base of a red crane fitted on a truck frame, the part that carries the whole crane as it turns.
Two buyers from Colombia in MIAOXUE safety helmets filming red knuckle boom cranes on the assembly line in Xuzhou
Two of the buyers record the knuckle boom cranes on our assembly line.
A Colombian buyer holding a large crane hook block while the group looks on in the MIAOXUE factory
A buyer checks a hook block while the rest of the group takes notes.

The 8-ton telescopic crane by the hall door

At the end of the tour the group stopped outside the hall in front of a red 8-ton telescopic boom crane already mounted on a truck chassis, with its boom extended over the truck bed and the hook lowered. It is a smaller crane than the 16-ton class they are considering, but it shows the same layout: column, slewing unit, main boom and outriggers on a truck frame. That is where the group photo was taken. There was no crane demonstration during this visit.

Buyers from Colombia looking up at the slewing mechanism and base of a red truck-mounted crane at the MIAOXUE factory
Looking at the slewing unit and base of a crane fitted on a truck frame.

What other buyers can take from this visit

If you are planning to buy a truck-mounted crane from China, this visit points to a few practical steps:

  1. Use the trade fair to start, then see the factory. A booth displays a few machines, whereas the factory shows the production line, the components and the workmanship.
  2. Record what matters to your team at home. For example, short videos of the boom, the slewing unit, the hook block and the welds answer more questions than a brochure.
  3. Ask for the load chart of the exact model. A 16-ton crane does not lift 16 tons at full reach. Compare what it lifts at your working radius; our guide on how to read a crane load chart shows how. In the United States, the OSHA crane rule 29 CFR 1926.1417 requires the load charts to be readily available in the cab, which is a sensible practice in any country.
  4. Ask for a demonstration if you need one. Tell the factory in advance so a crane can be prepared for operation during your visit.
  5. Bring your truck details. Chassis model, wheelbase and the space behind the cab decide which crane fits. Our guide to buying a truck-mounted crane from China covers what to check before you order.

Frequently asked questions

Can I visit the MIAOXUE crane factory in Xuzhou?

Yes. Buyers from more than 40 countries have visited our factory, and you can see photos on our Global Customer Visits page. Please contact us before you travel so we can plan the visit around your schedule.

Can I see a crane working during my visit?

Tell us in advance if you want a demonstration. This group did not ask for one, so their visit focused on the assembly line and the crane parts. Another buyer from Nigeria watched a live demonstration during his three-hour factory visit.

Which MIAOXUE cranes are in the 16-ton class?

Our 16-ton range includes the SQ16SA5 telescopic boom truck-mounted crane and knuckle boom models. Each product page lists the full specifications and the load chart for that model.

Plan your own visit

We thank our visitors from Colombia for travelling to Xuzhou after the Canton Fair. If you would like to see our truck-mounted cranes in person, send us your travel dates and we will prepare the visit, or browse more customer visits from around the world first.

On 9 November 2026, a crane repair and parts business from Mauritius inspected the SQ6.3ZA4 knuckle boom crane in our factory and paid a deposit on the spot.

Written by Achord Chan, Product Operations Director at MIAOXUE, based on our sales team’s account and photos from the visit. We do not publish the customers’ names or company.

Updated Back to News